The water will automatically heat up to the level set by the user and maintain the temperature. MULTIPLE USAGES - Jacuzzi water heater operation is fully automatic and easy to use. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water.Do not use a thermostat where chemically aggressive gases or solvents. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves. Temperature heaters should be used with 500W or higher circulating water pumps for normal use. The inner tank of the thermostat is stainless steel, which does not rust and the water quality is cleaner.
The heating is fast, and steam can be quickly released in a short time. Once the temperature is over 60(140), the temperature protection device will trip automatically.
Thermostat with a pressure-sensitive switch can be protected from a dangerous operating system in the absence of water. Once the water level is low (water pressure is below 20KPa), the pressure sensor switch will interrupt the power supply. Thermostat temperature preset by the user based on, until the self-heating temperature. When the water temperature drops a few degrees, the thermostat will automatically turn on the heating. The product is small in size, easy to carry and install.
It can be installed in the circulation massage tube at the bottom of the bathtub. The thermostat for home sauna is also widely used commercially.
It can be applied to multiple scenes such as indoor and outdoor small swimming pools and bathtubs. (50 mm) Interface Swimming Pool Heater.
The Electrical pool heater is designed specifically for the needs of the Jacuzzi. The thermostat can keep the water temperature between 20-40(68-104) adjustable, set a most comfortable bath temperature.
Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use. Voltage: AC 220-240 V / 50-60 Hz.Pipe Dimeter: 1 (2.54 cm). Size: 10.4" x 4.9" x 4.9(264 x 125 x 125 mm). Net Weight: 4.4 lbs (2 kg).
Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment. 1 x Water Heating Thermostat.
We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA.
If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage.Used items will not be accepted for return. All emails will be responded to within.
Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748.300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item "3KW Tub Heater Thermostat Electric Water Heater 220V Swimming Pool Hot SPA" is in sale since Wednesday, May 20, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels". The seller is "ganfeii1_4" and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.