Shell Tube Heat Recovery Pool Heater For Swimming Pools Spas 200 kBtu/hr
Shell Tube Heat Recovery Pool Heater For Swimming Pools Spas 200 kBtu/hr. Spa Pool Heat Exchanger 200kBtu Stainless Heat Recovery Pool Heater 1 1/2 FPT. The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don't have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. The heat exchanger is made of 304 stainless steel, which is durable and has a long service time. The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don't have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving. You can easily clean it without much effort and time because of its smooth surface and fewer gaps. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc.
It is used in spas, swimming pools, spas, hot tubs, etc. The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer. The heat exchanger is made of 304stainless steel so that it is. Therefore, it is suitable for chlorine or saltwater pools and spas. Heat Transfer Area: 0.45m²/4.8ft².
Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT. Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch.
Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger.
2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.
If it's non-workdays, please kindly be patient and wait till Monday. Gas / Wood / Solar / Heat Pump / Electricity. Side of hot water pipe. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels". The seller is "abandi100" and is located in this country: US.
This item can be shipped to United States.
- Feature 1: Stable characteristic, high reliability
- Warranty: 5 Year
- * Feature *: \uD83D\uDD25high performance\uD83D\uDD25reliable quality\uD83D\uDD25good stability
- Feature: Fast shipping
- Type: ppol heat exchanger
- Brand: Unbranded
- Material: 304 stainless steel
- Same Side Ports: 1 1/2\
- Weight: 11.5lbs(5.2kg)
- Power Source: Gas / Wood / Solar / Heat Pump / Electricity
- Output: 200 kBtu/hour
- Hot Water flow rate: 30 L/min
- Cold water flow: 250 L/min
- Side of hot water pipe: 1\
- Country/Region of Manufacture: China
- Heat transfer area: 4.8 square feet
- Packing size: 54*19*19cm
- Suitable For: Above Ground Pools
- BTUh Heating Rating: 100,001-350,000 BTUh